Introducing the Kurt DX4 CrossOver Vise

The evolutionary DX4 CrossOver® Vise combines all the great features of the world renowned KURT D40 and 3400V vises, along with new state-of-the-art workholding features. DX4 CrossOver achieves new levels in precision and performance where flatness and parallelism are important and is a better vise than our own D40 in every way we measure a vise. With KURT’S MADE IN AMERICA commitment, the DX4 CrossOver is destined to become the go-to-vise for todays machining applications.

DX4™ CrossOver® Features:

1.DX4 CrossOver vise is a combination of AngLock®, Pull-Type and 2 top bolt FEA designed stationary jaw. When combined they create an ultra unique strategy for a better vise:
– AngLock® design reduces jaw lift
– Pull-type design reduces stress on body during clamping

2. Hardened vise bed/jaw plates

3.Semi-hard steel screw

4. 80,000 psi ductile iron body, nut and movable jaw

5.6.5" opening

6. New wider 2 bolt stationary design fastens from the top

7. Bolts & locates on 40mm, 50mm and 2" grid patterns

8. Accepts sine keys for alignment (not included)

9.Chip evacuation straight through the body

10. Screw support held in place with snap rings

11. Groove Lock® jaw plate and workstop included

12. New brush seal nut design makes it easier to replace

13 Includes chip guard

14. Powder coat paint is long lasting and durable

15. Matching of the bed heights or keyway to stationary jaw (additional cost)

16. Lifetime Iron Clad Warranty

DX4 CrossOver features
comparison to D40 Vise:

17. DX4 is a replacement vise to D40 vise

18. Larger opening (6.5" versus 3-7/8")

19. Same bed height as D40

20. Narrower body style than D40 and allows more vises on machine table

21. Updated proven bearing pack shared with the 3400 series

22. Same distance from the keyway to stationary as D40

DX4 CrossOver Vise
Models available:

DX4 Manual

DX4R Manual Reverse